Toro 20339
Engine maintenance kits for the Toro 20339
Short answer
Toro lists kit 20234 for serial range 316000001–316999999, and kit 130-8148 for 400000000–401999999.
Verified options
What we have verified
| Part | Serial range | Status |
|---|---|---|
| 20234Engine Maintenance Kit for Briggs & Stratton Engine | 316000001–316999999 | Confirmed fit |
| 130-8148Briggs & Stratton EXi Engine Maintenance Kit Replacement | 400000000–401999999 | Confirmed fit |
| 20234Engine Maintenance Kit for Briggs & Stratton Engine | 400000000–401999999 | Not verified |
| 130-8148Briggs & Stratton EXi Engine Maintenance Kit Replacement | 316000001–316999999 | Not verified |
What decides it
The numbers that matter here
- Serial range
316-series takes 20234; 400-series takes 130-8148
The whole decision. Two kits for one model number.
- Same boundary as the 20340, not the 20334
Changes at 316 → 400
The 20334 changes at 315 → 316. Do not carry a rule across from another machine, even a near-identical one.
- Kit contents
Itemized for 20234, not for 130-8148
Toro states that 20234 contains 20 oz. SAE 30 oil, a spark plug, an air filter and a 0.5 oz. fuel treatment packet. For 130-8148 it says only "the key consumable service items". The two therefore cannot be compared on contents from these pages.
In detail
Choosing engine maintenance kits for this mower
On the 20339 the engine maintenance kit changes between the 316- and 400-series serial ranges. The earlier listing shows 20234, the Engine Maintenance Kit for Briggs & Stratton Engine; the later one shows 130-8148, the Briggs & Stratton EXi Engine Maintenance Kit Replacement.
That is the same boundary as on the Toro 20340 — and it is not the boundary on the Toro 20334, where the change has already happened by the 316-series range. Three walk-behind Toros of the same cutting width and the same engine size, and the split falls in two different places. This is the reason we record fitment per serial range rather than per model, and the reason we will not publish a general rule about where Toro changes kits.
Toro publishes nine parts listings for this model number. We have opened two. If your serial number is not inside 316000001–316999999 or 400000000–401999999, this page has not verified anything for your machine, and Toro’s own listing for your range is the place to check.
As on the other machines, we do not claim that either kit substitutes for the other. Toro presents them as the kits for two ranges, and says nothing about replacing one with the other.
The mistake we see most
Method
How we established this
We opened Toro’s parts listings for model 20339 under serial ranges 316000001–316999999 and 400000000–401999999 and recorded the maintenance kit shown in each, then compared the boundary against the listings we had already opened for the 20334 and the 20340.
Provenance
Sources
Last verified against these sources on August 17, 2026.
- 1
The Toro Company · Primary source · Accessed August 17, 2026
Lists 20234 (Engine Maintenance Kit for Briggs & Stratton Engine), 38990 (22 Inch Drive Belt for Recycler Mower), 59534P, 59502 and 490-2012. The range selector names eight further serial ranges for this model number.
- 2
The Toro Company · Primary source · Accessed August 17, 2026
Lists 130-8148 in place of 20234, and adds 137-4837P (Replacement 11 in. Rear High Wheel). Still lists 38990 and 59502.
- 3
22" (56cm) SMARTSTOW Variable Speed High Wheel Lawn Mower — model 20339
The Toro Company · Primary source · Accessed August 17, 2026
Product specification page. States "7.25 ft-lb Gross Torque** Briggs & Stratton® EXi 163cc w/Ready Start®", a 22 in / 56 cm cutting width, front-wheel drive with a variable speed self-propel system, and a 14 Gauge Steel deck.